StellaF2_EN_Combine_F_FM.book Page 202 Friday, February 14, 2003 5:16 PM
Appendix
Connecting to a Telephone Line
Connecting the Machine to the
Telephone Line
R CAUTION:
• To reduce the risk of fire, use
only No. 26 AWG or larger
telecommunication line cord.
R ATTENTION:
• Pour réduire le risque d'incendie,
utiliser uniquement des conduc-
teurs de télécommunications 26
AWG ou de section supérieure.
Important
❒ Make sure that the power cable is
plugged in before connecting the
machine to the telephone line.
There are similar sockets located at
the rear of the machine.
• TEL: For the optional handset or
an external telephone
• LINE1: Telephone line connection
A A A A
Insert the line cable into the sock-
et labeled "LINE1".
10
B B B B
Connect the other end of the line
cable to your telephone line.
202
Connecting to an Additional
G3 Line
You can connect the machine to two
G3 lines by installing the optional ex-
tra G3 interface unit. Connect the ad-
ditional G3 line to the "LINE2" socket.
Important
❒ Contact your service representa-
tive when connecting to the addi-
tional G3 line.
❖ ❖ ❖ ❖ Connecting location
Connecting an External
Telephone
A A A A
Plug the handset jack into the
"TEL" socket at the rear of the ma-
chine.
ZHMH300E
ZHMP070E
ZHMH290E