Gestetner F104 Settings Manual page 64

StellaF2_EN_Combine_F_FM.book Page 182 Friday, February 14, 2003 5:16 PM
Solving Operation Problems
Code Possible Cause
0-80~88 Poor line condition Incompatible or faulty terminal at the other end
1-00 Document jam Improperly inserted document
1-01 Document length exceeded the maximum limit Same as for code 1-00
1-04 There is a problem with the scanner.
1-08
2-xx Possible fault in your machine
4-10 ID codes did not match. Co-ordinate ID codes with the other party.
5-20 Insufficient memory to receive the message. When the pages in memory have been
printed, ask the other party to resend.
5-21
5-22
5-23
5-25 Your machine has a problem.
5-30
6-00 Poor line condition or a problem with your machine
6-01
6-02
6-04
6-05 Poor line condition, a problem with the machine at the other end, or a problem
with your machine
6-06 A problem with the machine at the other end, or a problem with your machine
6-08 A problem with the machine at the other end
8
6-09 A problem with the machine at the other end, or a problem with your machine
6-10
9-07 Copy jam at the tray entrance (first, or top, paper feed station)
9-08 Copy jam inside the machine (first, or top, paper feed station)
9-09 Copy jam at the feed-out area
9-10 Toner end. Replace the toner cartridge.
9-17 There is a problem with your printer.
9-20
9-22
9-23
9-24
182