Acceptable Types Of Originals - Gestetner F104 Settings Manual

StellaF2_EN_Combine_F_FM.book Page 209 Friday, February 14, 2003 5:16 PM

Acceptable Types of Originals

Make sure your originals are completely dry before placing them in the machine.
Originals containing wet ink or correcting fluid will mark the scanner and affect
the resulting image.
Acceptable original sizes
Where Original is
Placed
Auto Document Feed-
er (ADF)
Paper size and scanned area
The part shaded will not be scanned, because it is outside the maximum scan-
ning width range.
Note
❒ Images at the edges of an original document may not be scanned (as shown
in the following values) even if you set a standard sized original properly.
*1
• Maximum 4 mm (0.2 in.)
*2
• Maximum 4 mm (0.2 in.)
*1 *2
• + Maximum 6 mm (0.3 in.)
*3
• 4 mm (0.2 in.)
*4
• 5 mm (0.2 in.)
❒ There may be some difference in size between the image scanned by your ma-
chine and the image printed at the receiving end.
Acceptable Original Maximum Number
Size of Sheets
• Maximum: • 8
216×356 mm
• A4 or 8
(8.6×14.1 in.)
• Minimum:
140×140 mm (5.6
×5.6 in.)
GFGYOM0N
Paper Thickness
1
/ "×14" 30 sheets 52–105g/m
2
lb. paper (0.05 to 0.2
1
/ "×11" 70
2
mm)
sheets
Specifications
2
, 14 to 28
10
209