Specified Tray - Gestetner F104 Settings Manual

StellaF2_EN_Combine_F_FM.book Page 130 Friday, February 14, 2003 5:16 PM
Key Operator Settings

Specified Tray

This function requires the optional paper
tray unit.
The Specified Tray function enables
you to have messages from specified
senders printed using one paper tray,
and messages from other senders to
be printed using another paper tray.
For example, if green paper is set in
the main paper tray, and white paper
is set in the optional paper tray unit,
you can distinguish the senders of the
message at a glance by choosing to
have messages from specified send-
ers printed using the main paper tray
and messages from others printed us-
ing the optional paper tray unit.
Note
❒ It is recommended that you print
the specified sender List and keep
it after registering or editing set-
7
tings for this function. See p.132
"Printing a list of specified send-
ers".
❒ The Specified Tray function is not
available for the bypass tray (op-
tion for Type1). You need to have
the optional paper tray unit to use
this feature.
❒ The Specified Tray function is not
activated when receiving messag-
es with Polling Reception or Free
Polling Reception.
❒ You can choose to print messages
from specified senders, or messag-
es from senders other than speci-
fied senders using the main paper
tray with the User Parameters. See
p.146 "User Parameters" (switch
08; bit 5,4).
130
❒ You can program specified send-
ers for the following six functions:
Authorized Reception, Memory
Lock, Multi-copy Reception, Speci-
fied Tray, Two-sided Reception,
and Forwarding. The maximum
number of specified senders is 50.
❒ You can use up to 24 characters
when registering a specified send-
er for G3 communication. You can
also specify wildcards. See p.86
"Entering Characters", Basic Fea-
tures.
❒ Register the Own Name or Own
Fax Number of the other party as
the specified sender. If the other
party has not registered their Own
Name or Own Fax Number, you
cannot register them as a specified
sender.
❒ If the specified sender's fax ma-
chine is of the same make as your
machine, register the sender name
registered to their machine. If the
specified sender's fax machine is of
a different make, register the fax
number.
❒ You can check the sender name or
sender's fax number registered to
the fax machines of specified send-
ers in the Journal. See p.40 "Print-
ing the Journal".
❒ You can change the current setting
by following the same procedure
for making a new setting. Change
the values of settings according to
your needs.
A A A A
Press the { { { { User Tools} } } } key.