Table of Contents
Advertisement
Copying
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, postcards and copy paper that cannot be loaded in the paper trays.
Important
❒ When copying from the bypass tray, select [1 Sided] for copying in [Dup./Com-
2
bine/Series] (for example [1 Sided] → [1 Sided] or [2 Sided] → [1 Sided]).
❒ Paper has a vertical length of 100-297 mm (3.9"-11.6") and a horizontal length
of 148-600 mm (5.8"-23.4") can be copied from the bypass tray.
❒ The machine can automatically detect the following sizes as standard size
copy paper:
• Metric version: A3L, A4K, A4L, A5K, A5L, 8
• Inch version: A3L, 11" × 17"L, 8
❒ If you want to use the size of paper other than the above, be sure to specify
the size.
❒ When copying on OHP transparencies or paper heavier than 128 g/m
you need to specify the type and size of paper in "Special Paper".
❒ The maximum number of sheets you can load into the bypass tray depends
on paper type. The number should not exceed the upper limit.
❒ Paper larger than 433 mm (17.0") in length is likely to jam, crease, or not feed
in properly.
26
1
/
2
" × 11"K, 8
" × 11"L, 5
1
1
/
/
2
2
" × 13"L
" × 8
1
1
/
/
"L
2
2
2
(about 34 lb.),
Advertisement
Table of Contents
