Table of Contents
Advertisement
StellaF1EN-3_FM.book Page 74 Monday, November 12, 2001 11:40 AM
Key Operator Settings
A Press 0 0 0 0 or 1 1 1 1 to select " 3. De-
lete Sender ".
B Press the { { { { OK} } } } key.
C Press 0 0 0 0 or 1 1 1 1 to select the
name of the Specified Sender
that you want to delete.
D Press the { { { { OK} } } } key.
The Specified Sender is deleted.
If you want to delete more Spec-
ified Senders, repeat from step
B.
Printing a List of Specified
Senders for Memory Lock
7
You can print a list of Specified
Senders for Memory Lock.
A Press 0 0 0 0 or 1 1 1 1 to display " 4.
Print Sender List ".
B Press the { { { { OK} } } } key.
C Press the { { { { Start} } } } key. The list
prints.
K K K K
Press the { { { { User Tools} } } } key to re-
turn to the standby display.
74
Specified Tray
Use this function to have messages
from specified senders printed on dif-
ferent paper. For example, imagine
green paper placed in the main paper
tray, and white paper placed in the
optional paper tray unit. By choosing
to have fax messages from specified
senders printed on green paper and
all others printed on white paper, you
can distinguish between them at a
glance.
Limitation
❒ This item is available only after the
optional paper tray unit has been
installed.
Note
❒ To use this function you must
switch Specified Tray on after you
register the specified senders.
❒ You can select to print fax messag-
es from specified senders on the
paper loaded in the main paper
tray or you can select to print fax
message from non-specified send-
ers on the paper loaded in the main
paper tray. See p.85 "User Param-
eters" (switch 08, bits 5 and 4).
❒ Make sure that you place the same
size paper in the main paper tray
and the optional Second Tray. If
you do not place the same size pa-
per for both paper supplies, the re-
ceived messages will be stored in
memory.
A A A A
Press the { { { { User Tools} } } } key.
Advertisement
Table of Contents
