Machine Status And Configuration - Gestetner DSm415 Network Manual

Machine Status and Configuration

You can check the machine status and configuration using telnet or UNIX.
❖ ❖ ❖ ❖ telnet
Use the "info" or "status" command.
❖ ❖ ❖ ❖ UNIX
Use the "lpr" or "lpstat" command, or "stat", "info" parameter of rsh, rcp, or
ftp.
Machine status
Status
Call Service Center
Card/Counter not inserted
Coin/Key Counter not inserted
Coin or amount not inserted
Cover Open: Bridge Unit center
Cover Open: Bridge Unit Left
Cover Open: Bridge Unit Right
Cover Open: Finisher
Cover Open: Finisher Front lower
Cover Open: Finisher Lower Left
Cover Open: Finisher Upper
Cover Open: Front Cover
Cover Open: Lower Right Cover
Cover Open: Right Cover
Cover Open: Upper Right Cover
Empty: Toner
Energy Saver Mode
Error: Duplex Unit
Error: Ethernet Board
Error: HDD Board
Error: IEEE1394 Board
Error: Memory Switch
Understanding Displayed Information
Description
Call service center and ask for assistance.
The machine is waiting for prepaid card or key
counter to be inserted.
The machine is waiting for coin or key counter
to be inserted.
The machine is waiting for coin to be inserted.
Bridge unit center over is open.
Bridge unit left cover is open.
Bridge unit right cover is open.
Finisher cover is open.
Finisher lower-front cover is open
Finisher lower-left cover is open.
Finisher top cover is open.
The machine's front cover is open.
The machine's lower-right cover is open.
The machine's center-right cover is open.
The machine's upper-right cover is open.
Toner has run out.
The machine is standing by in Energy Saver
mode.
Duplex unit is not installed correctly.
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
An IEEE 1394 board error has occurred.
Memory switch data is corrupt.
9
111