Gestetner DSm415 Network Manual page 129

Message
inetd start.
<interface> started with IP: <IP address>
<Interface>: Subnet overlap.
IPP cancel-job: permission denied.
ipp disable.
ipp enable.
IPP job canceled. jobid=%d.
job canceled. jobid=%d.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
multid start.
Name registration failed. name=<NetBIOS
name>
Name registration success in Broadcast
name=<NetBIOS name>
Name registration success. WINS Serv-
er=<WINS Server Address> NetBIOS
Name=<NetBIOS name>
nbstart start.(NetBEUI)
nbtd start.
NetBEUI Computer Name =<computer name> The NetBEUI Computer Name is defined as
nmsd start. (NetBEUI)
nprinter start. (NetWare)
nwstart start. (NetWare)
Causes and solutions
An inetd has started.
<IP address> has been set for <Interface> and
<Interface> started.
Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
of another interface.
Set Subnet so it does not overlap with another
interface.
The printer could not authenticate the name of
the user attempting to cancel a job.
Printing with ipp is disabled.
Printing with ipp is enabled.
The spooled job has been canceled due to er-
ror or user request.
The spooled job has been canceled due to er-
ror or user request.
The resource lease time received from the
DHCP server is <lease time> in seconds. The
renewal time is also <renew time> in seconds.
(In print server mode) Logged on to the file
server with NDS or BINDERY mode.
Data transmission service for multiprotocols
has started.
The printer could not register the name of
NetBIOS.
The NetBIOS name was successfully regis-
tered from a broadcast.
The NetBIOS name was successfully regis-
tered to the WINS server.
The server for setting the NetBEUI protocol
stack has started.
nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
<computer name>.
nmsd (Name Server Daemon) has started.
(In remote printer mode) NetWare service has
started.
The service for NetWare protocol stack setting
has started.
Message List
9
123