Settings You Can Change With User Tools - Gestetner DSm415 Network Manual

Setting Up the Machine on a Network
File Max. Reception E-mail Size
Transfer
E-mail Storage in Server
Default User Name/ Password (Send)
Program/ Change/ Delete E-mail Message
Program/ Change/ Delete Subject
3
Scanner Recall Interval Time
Number of Scanner Recalls
E-mail Account
*1
You can make the TCP/IP settings if SmartNetMonitor for Admin is communicating
with the machine using IPX/SPX.
*2
You can make the IPX/SPX settings if SmartNetMonitor for Admin is communicat-
ing with the machine using TCP/IP.
Settings You Can Change with
User Tools
Interface Settings/Network
❖ ❖ ❖ ❖ IP Address
Before using this machine in the
network environment, you must
configure the IP address and sub-
net mask.
• Auto-Obtain (DHCP)
• Specify
When you select [Specify], enter
the [IP Address]and [Sub-net
Mask] as "xxx.xxx.xxx.xxx"("x"
indicates a number).
• IP Address: 011.022.033.044
• Sub-net Mask: 000.000.000.000
34
Name on the control panel
Smart-
Web NetMon-
browser itor for
Admin
❍
❍
❍
-
-
-
-
-
Note
❒ Default: Auto-Obtain (DHCP)
❒ If you use the interface for Eth-
ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made with care.
❒ If you install the IEEE 1394 in-
terface board (optional) and use
the IEEE 1394 interface, you
must set the address of the do-
main, different from the [IP Ad-
dress] of [IEEE 1394]. If you
intend to set the address for the
same domain, set a different
value for the [Sub-net Mask].
❒ When you select [Specify], be
sure not to set the same [IP Ad-
dress] as that of another ma-
chines on the network.
❒ The physical address (MAC ad-
dress) also appears.
telnet
- -
- -
- -
- -
- -
- -
- -
- -