Gestetner DSm415 Network Manual page 101

The following is a sample configu-
r a t i o n u s i n g t h e r e g i s t r a tio n
number 3 with the IPX address
7390A448, and the MAC address
00:00:74:62:5C:65:
msh> snmp 3 ipx 7390A448:
000074625C65
IPP
Use the "ipp" command to configure
IPP settings.
❖ ❖ ❖ ❖ Viewing setting
The following command displays
the current IPP setting:
msh> ipp
Example output:
timeout=900(sec)
auth off
• The "timeout" setting specifies
how many seconds the compu-
ter keeps trying to access the net-
work printer to send print jobs if
no connection can be made.
• The "auth" setting indicates the
user authorization mode.
❖ ❖ ❖ ❖ IPP timeout configuration
Specify how many seconds to wait
before canceling a print job if it has
been interrupted for some reason.
The time can be from 30 to 65535
seconds.
msh> ipp timeout {30 - 65535}
❖ ❖ ❖ ❖ IPP user authorization configuration
Use IPP user authorization to re-
strict printing with IPP to certain
users. The default is "off".
msh> ipp auth {basic|di-
gest|off}
• "basic" and "digest" are user
authorization settings.
• "off" removes the user authori-
zation.
Remote Maintenance by telnet
Note
❒ If you select "basic" or "digest",
see next section "Configuring
IPP user authorization" for how
to configure the user name. Up
to ten user names are available.
❖ ❖ ❖ ❖ Configuring IPP user authorization
Use the following command:
msh> ipp user
The following message appears:
Input user number (1 to
10):
Enter the number, user name, and
password.
IPP user name:user1
IPP password:*******
After configuring, the following
message appears:
I P P c o n f i g u r a t i o n
changed.
Direct printing port
The direct printing port allows print-
ing directly from a computer, con-
nected to the network, to the printer.
Use the "diprint" command to change
direct printing port settings.
❖ ❖ ❖ ❖ View settings
The following command displays
the current direct printing port set-
tings:
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect off
• "Port" specifies
number of the direct printing
port.
• The "bidirect" setting indicates
whether the direct printing port
is bidirectional or not.
9
the port
95