Gestetner DSm415 Network Manual page 133

❖ ❖ ❖ ❖ LDAP error messages
Note
❒ See the description corresponding to the error message. The number in the
error message is the RFC error number.
LDAP errors appear thus:
<Status>:<LDAP error message>
• Status
• init
Error during LDAP initialization.
• bind
Error during LDAP binding.
• search
Error during LDAP search.
• LDAP error message
LDAP error message
Operations error(1)
Protocol error(2)
Time limit exceeded(3)
Size limit exceeded(4)
Compare False(5)
Compare True(6)
Authentication method not supported(7)
Strong authentication required(8)
Partial results and referral received(9)
Referra(10)
Administrative limit exceeded(11)
Criticial extension is unavailable(12)
Confidentiality required(13)
SASL bind in progress(14)
Causes and solutions
An operating error has occurred. The func-
tion is not possible in the current status.
A protocol error has occurred.
The search could not be completed within
the time allowed.
Too many hits have been returned. Check
the search criteria or starting position.
Result of compare request is false.
Result of compare request is true.
The selected authentication method is not
supported. Check the authentication setting.
Strong authentication is required. Check the
authentication setting.
Partial results and referrals have been re-
ceived.
Referral
The amount of data has exceeded the limit
set by the network administrator.
Extended function is unavailable. Consult
the network administrator.
Confidentiality is required. Check the server
setting. Consult the network administrator if
necessary.
SASL binding is in progress.
Message List
9
127