Table of Contents
Advertisement
Technical Reference
User Parameters
Adjusting your machine sometimes requires that you change special settings
called user parameters. For each user parameter, you must change a bit in a
switch.
A switch has eight bits. Each bit has a value of 1 or 0, and each bit is numbered
0 to 7 from the right.
Bit values and Bit numbers
Bit value
Bit number
In the following example we'll change bit 3 of switch 05 in the user parameters.
A
Press the { { { { Function} } } } { { { { 6} } } } then enter the access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } . Then
press { { { { 6} } } } { { { { 3} } } } and the { { { { Yes} } } } key.
You'll get the display.
SETTING?
PRINT LIST h
7
Note
You can press the W key to see a list. Otherwise, press the {Yes} key.
B
Press the { { { { Yes} } } } key again and use W W W W and V V V V to change switches.
Note
For example go to switch 05 by pressing V five times.
SWITCH 05 :1000 0001
C
To change bit 3, press { { { { 3} } } } on the ten key pad.
Bit 3 will change from 1 to 0 or from 0 to 1.
SWITCH 05 :1000 1001
Note
To change bit 0, press {0} to change bit 1, press {1} and so on.
D
Press the { { { { Yes} } } } and { { { { Function} } } } keys.
132
0
1
0
7
6
5
Y/h
KPAD/Y/ hi
KPAD/Y/ hi
0
0
0
4
3
2
0
0
1
0
Advertisement
Table of Contents
