Printing Messages Received Into Memory (Function 52) - Gestetner 9920 Operator's Manual

Printing messages Received
into Memory (Function 52)
If someone sends you a message us-
ing the Confidential Transmission
feature, instead of printing it out im-
mediately, the machine stores it in
memory. The Receive File indicator
on the operation panel blinks to in-
form you when a confidential mes-
sage has come in. To print out these
messages, follow the steps below.
Note
You need to know the Confidential
ID before you start this procedure.
A
Press { { { { Function} } } } { { { { 5} } } } { { { { 2} } } } then the
{ { { { Yes} } } } key.
CONFID'L ID
kkkk
B
Enter the Confidential ID on the
ten key pad ( e.g. 1234).
CONFID'L ID
kkkk
Note
If no messages are stored in
memory for this Confidential
ID, the display will prompt you
for a Confidential ID again. In
this case, go to step D.
C
Press { { { { Start} } } } to print the fax mes-
sage.
CONFID'L ID
INVALID ID
D
KPAD
START/N
START/N
Confidential Reception
Note
If more messages are stored for
this ID, repeat this step as many
times as necessary.
To check for messages sent with
other Confidential ID codes, go to
step B B B B . Alternatively, press the
{ { { { No} } } } key then the { { { { Function} } } } key
to quit this function.
READY 100% 10:00AM
SET DOC. OR DIAL NO.
3
37