Table of Contents
Advertisement
Installation
Connecting The Power And Switching On
R CAUTION: Do not switch on until everything is connected properly.
A
Insert the power cable into the socket located at the rear of the machine.
B
Plug in the cable to the mains.
C
Turn the power switch on.
Important
The supply form the wall outlet must not fluctuate more than 20 V either
side of 115 Vac.
The power cord should not be laid in a place where it might trip somebody.
Do not lay anything on the power cord.
If you have to use an extension cord, make sure that it is capable of carry-
8
ing 125V/15A, and that your facsimile terminal is the only piece of equip-
ment connected to that cord.
164
TSTP090N
Advertisement
Table of Contents
