Using Art-Net Function - Panasonic PT-RQ13K Operating Instructions Manual

PJLink security authentication
The password used for PJLink is the same as that of the password set for web control.
When using the projector without security authentication, do not set a password for web control.
f For specifications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/

Using Art-Net function

Since the network function of the projector supports the Art-Net function, you can control the projector settings
with the DMX controller and application software using the Art-Net protocol.
Channel definition
The following table lists the channel definitions used for controlling the projector with the Art-Net function.
Channel settings can be switched using the [NETWORK] menu → [Art-Net CHANNEL SETTING] (x page 164).
The control details assigned to each channel are listed in the following table.
f Channel assignment for [USER] is in factory default setting. Assignment can be changed.
Channel
CHANNEL1
CHANNEL2
CHANNEL3
CHANNEL4
CHANNEL5
CHANNEL6
CHANNEL7
CHANNEL8
CHANNEL9
CHANNEL10
CHANNEL11
CHANNEL12
Control details
r LIGHT OUTPUT
This can be set in 256 steps between 100 % and 0 %.
Performance
100 %
...
0 %
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to [1])
Performance
No operation
SDI1
SDI2
No operation
Chapter 6 Appendix — Technical information
[2]
LIGHT OUTPUT
INPUT SELECT
LENS POSITION
LENS H SHIFT
LENS V SHIFT
LENS FOCUS
LENS ZOOM
POWER
GEOMETRY
CUSTOM MASKING
ENABLE/DISABLE
NONE
Control details
[USER]
LIGHT OUTPUT
INPUT SELECT
LENS POSITION
LENS H SHIFT
LENS V SHIFT
LENS FOCUS
LENS ZOOM
POWER
GEOMETRY
CUSTOM MASKING
ENABLE/DISABLE
NONE
Parameter
0
...
255
Parameter
0-47
48-55
56-63
64-255
[1]
SHUTTER
INPUT SELECT
LENS FUNCTION SELECT
LENS CONTROL
POWER
LIGHT OUTPUT
ENABLE/DISABLE
FADE-IN
FADE-OUT
CUSTOM MASKING
GEOMETRY
NONE
Default value
0
Default value
0
ENGLISH - 197