[Frame Sync Setting] - Panasonic PT-RQ13K Operating Instructions Manual
Hide thumbs
Also See for PT-RQ13K:
- Operating instructions manual (226 pages) ,
- Manual (5 pages) ,
- Operating instructions (functional manual) (248 pages)
Table of Contents
Advertisement
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4)
Press as to select [SAMPLING].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[4:4:4]
[4:2:2]
Setting [BIT DEPTH] in [SLOT IN] (SDI input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4)
Press as to select [BIT DEPTH].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[12-bit]
[10-bit]
Setting [SIGNAL LEVEL] in [SLOT IN] (SDI input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4)
Press as to select [SIGNAL LEVEL].
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[64-940]
[4-1019]
[FRAME SYNC SETTING]
Set if the frames are to be synchronized between the multiple projectors.
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [4:4:4] or [4:2:2].
[4:4:4] or [4:2:2] is automatically selected by reading the payload ID attached to the input signal.
[4:2:2] is selected when the payload ID is not attached to the input signal.
Fixes to [4:4:4].
Fixes to [4:2:2].
Automatically select [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
Normally use this setting.
Select this item when gray is displayed as black.
ENGLISH - 119
Advertisement
Table of Contents
