[Ac Voltage Monitor] - Panasonic PT-RQ13K Operating Instructions Manual

[SIGNAL INFORMATION]
[DETAILED INFORMATION]
*1 The temperature status is indicated with text color (green/yellow/red) and bar scale. Use the projector within the range that the indication is
green.
Note
f The content of the status can be sent to the E-mail address (up to two addresses) set in "[E-mail set up] page" (x page 177) when the
<ENTER> button is pressed while displaying the pages 1/4 to 3/4 of the [STATUS] screen.
f The detailed information of the input signal is displayed when the <ENTER> button is pressed while displaying the page 4/4 of the
[STATUS] screen. Information for multiple input signals may be displayed depending on the projected image. Press qw to switch page.
f There are items that are displayed or not displayed in [SIGNAL INFORMATION] and [DETAILED INFORMATION] depending on the setting
or the input signal.
f If any abnormality has occurred on the projector, press the <DEFAULT> button while the [STATUS] screen is displayed to display the detail
screen of the error information.
f For details on the contents displayed in [SELF TEST], refer to "Self-diagnosis display" (x page 193).

[AC VOLTAGE MONITOR]

Enable or disable the AC voltage monitor function. The value of input supply voltage is displayed on the self-
diagnosis display at the side of the projector when enabled.
1) Press as to select [AC VOLTAGE MONITOR].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When [ON] is set, the value of the input supply voltage is always displayed in the self-diagnosis display while the main power of the projector
is turned on.
f Even when [OFF] is set, the value of input supply voltage can be displayed temporarily in the self-diagnosis display by operating the button
on the remote control. (x page 74)
Chapter 4 Settings — [PROJECTOR SETUP] menu
[INPUT]
[SIGNAL FORMAT]
[LINK]
[SIMUL]
[4K DIVISION]
[COLOR SPACE]
[SAMPLING]
[BIT DEPTH]
[SIGNAL LEVEL]
[INPUT]
[UPPER LEFT INPUT],
[UPPER RIGHT INPUT],
[LOWER LEFT INPUT],
[LOWER RIGHT INPUT]
[SIGNAL FORMAT]
[SIGNAL FREQUENCY]
[SCAN TYPE]
[TOTAL DOTS]
[DISPLAY DOTS]
[TOTAL LINES]
[DISPLAY LINES]
[COLOR SPACE]
[SAMPLING]
[BIT DEPTH]
[SIGNAL LEVEL]
Disables the AC voltage monitor function.
Enables the AC voltage monitor function.
Displays the input terminal used for the projected image. Displays
the representative input terminal when one image is displayed with
multiple input signals. [MULTI DISPLAY] is displayed while in the
four-screen display mode.
Displays the format of the input signal.
Displays the settings of [SDI LINK], [HDMI LINK], and [DVI-D LINK].
Displays the determination result of the signal when set to [AUTO].
Displays the setting of [SIMUL INPUT SETTING].
Displays the determination result of the signal when set to
[AUTO(x2-speed)] or [AUTO(x4-speed)].
Displays the setting of [4K DIVISION].
Displays the determination result of the signal when set to [AUTO].
Displays the color space of the input signal.
Displays the sampling information of the input signal.
Displays the gradation of the input signal.
Displays the signal level of the input signal.
Displays the input terminal used for the projected image.
Displays the input terminal corresponding to each screen while in
the four-screen display mode.
Displays the format of the input signal.
Displays the frequency of the input signal.
Displays the scan type of the input signal.
Displays the total dot count of the input signal.
Displays the number of input signal display dots.
Displays the total line count of the input signal.
Displays the number of input signal display lines.
Displays the color space of the input signal.
Displays the sampling information of the input signal.
Displays the gradation of the input signal.
Displays the signal level of the input signal.
ENGLISH - 147