Panasonic PT-RQ13K Operating Instructions Manual page 113

[EDID2:4K/30p]
[EDID3:2K]
Note
f Switch the setting to [EDID2:4K/30p] when proper image is not projected while [EDID SELECT] is set to [EDID1:4K/60p] and the 4K video
signal is input.
f Switch the setting to [EDID3:2K] when proper image is not projected while [EDID SELECT] is set to [EDID1:4K/60p] or [EDID2:4K/30p] and
the 2K video signal or lower is input.
f For details of the signal described in EDID of [EDID1:4K/60p], [EDID2:4K/30p], or [EDID3:2K], refer to "List of plug and play compatible
signals" (x page 213).
Setting [EDID MODE] in [SLOT IN] (HDMI input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [EDID SETTING], and press the <ENTER> button.
f The [EDID SETTING] screen is displayed.
4) Press as to select [EDID MODE].
5) Press the <ENTER> button.
f The [HDMI EDID MODE] screen is displayed.
6) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
f When [DEFAULT] is selected, proceed to Step 11).
7) Press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
8) Press asqw to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p],
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], [1920x1200p],
[1920x2160p], [2048x1080p], [2048x2160p], or [2560x1600p].
9) Press the <ENTER> button.
f The [VERTICAL SCAN FREQUENCY] screen is displayed.
10) Press qw to select [VERTICAL SCAN FREQUENCY].
f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [2048x2160p], [2048x1080p], [1920x2160p], or
[1920x1080p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g [2048x2160p], [2048x1080p], [1920x2160p], [1920x1080p], [1920x1080i]
11) Press the <ENTER> button.
f The confirmation screen is displayed.
12) Press qw to select [OK], and press the <ENTER> button.
Note
f The settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in [EDID STATUS].
f The resolution and vertical scanning frequency settings may also be required on your computer or video device.
f After configuring settings, your computer or video device or the projector may be required to be turned off and on.
f A signal may not be output with the resolution and vertical scanning frequency that have been set, depending on your computer or video
device.
Chapter 4 Settings — [DISPLAY OPTION] menu
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
Switches to EDID corresponding to the 2K video signal (maximum 1 920 x 1 200 dots) or lower.
Standard setting.
Set the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.
ENGLISH - 113