Panasonic PT-RQ13K Operating Instructions Manual page 120

Frames of the projected images can be synchronized by linking multiple projectors using the <FRAME SYNC 1
IN/OUT> terminal and the <FRAME SYNC 2 OUT> terminal. A combined screen with a balanced contrast can
be displayed by sharing the brightness level of the video signal input to each projector when a multi-display is
constructed by linking the projected images of multiple projectors.
For details of how to connect the projectors, refer to "Connection example when multiple projected images are to
be synchronized" (x page 51).
1) Press as to select [FRAME SYNC SETTING].
2) Press the <ENTER> button.
f The [FRAME SYNC SETTING] screen is displayed.
3) Press as to select [FRAME SYNC].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[MASTER]
[SLAVE]
f When anything other than [OFF] is selected, proceed to Step 5).
The usage of the <FRAME SYNC 1 IN/OUT> terminal and the <FRAME SYNC 2 OUT> terminal is
displayed in [FRAME SYNC1] and [FRAME SYNC2] in the [FRAME SYNC SETTING] screen.
The contents that are displayed are as follows.
[FRAME SYNC]
[MASTER]
[SLAVE]
5) Press as to select [CONTRAST SYNC].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f When [ON] is selected, the usage of the <FRAME SYNC 1 IN/OUT> terminal displayed in [FRAME SYNC1]
is switched.
The contents that are displayed are as follows.
[FRAME SYNC]
[MASTER]
[SLAVE]
f When [ON] is selected, the diagnosis result if the target projector is correctly connected is displayed in
[STATUS].
120 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Select this item when the frames are not to be synchronized.
Select this item when the frames are to be synchronized.
Set this item in the one projector that is to be the synchronization source.
Select this item when the frames are to be synchronized.
Set this item in all the projectors that are to be the synchronization target.
[FRAME SYNC1]
[OUTPUT] is displayed.
The <FRAME SYNC 1 IN/OUT> terminal will
operate as an output terminal.
Connect to the <FRAME SYNC 1 IN/OUT>
terminal of the projector that is to be the
synchronization target.
[INPUT] is displayed.
The <FRAME SYNC 1 IN/OUT> terminal will
operate as an input terminal.
Select this item when the contrast is not balanced in the combined screen.
Select this item when the contrast is balanced in the combined screen.
The synchronization source projector with [FRAME SYNC] set to [MASTER] will calculate the
brightness level of the video signal to become optimum on the whole combined screen for every
frame. All the projectors targeted to link will control the dynamic contrast function based on the
calculation result.
[FRAME SYNC1]
[INPUT] is displayed.
The <FRAME SYNC 1 IN/OUT> terminal will
operate as an input terminal.
Connect to the <FRAME SYNC 2 OUT> terminal
of the last projector.
[INPUT] is displayed.
The <FRAME SYNC 1 IN/OUT> terminal will
operate as an input terminal.
[FRAME SYNC2]
[OUTPUT] is displayed.
The <FRAME SYNC 2 OUT> terminal will operate
as an output terminal.
Connect to the <FRAME SYNC 1 IN/OUT>
terminal of the projector that is to be the
synchronization target.
[OUTPUT] is displayed.
The <FRAME SYNC 2 OUT> terminal will operate
as an output terminal.
[FRAME SYNC2]
[OUTPUT] is displayed.
The <FRAME SYNC 2 OUT> terminal will operate
as an output terminal.
Connect to the <FRAME SYNC 1 IN/OUT>
terminal of the first projector that is to be the
synchronization target.
[OUTPUT] is displayed.
The <FRAME SYNC 2 OUT> terminal will operate
as an output terminal.