Panasonic PT-RQ13K Operating Instructions Manual page 219

DIGITAL LINK input
f Moving image signal resolution: 480i
Still image signal resolution: 640 x 400 to 2 560 x 1 600 (non-interlace)
f Dot clock frequency: 25 MHz to 297 MHz
HDMI input
*4
f Moving image signal resolution: 480i
Still image signal resolution: 640 x 400 to 2 560 x 1 600 (non-interlace)
f Dot clock frequency: 25 MHz to 594 MHz
DVI-D input
*5
f Moving image signal resolution: 480i
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f Dot clock frequency: 25 MHz to 162 MHz
*1 The optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) is not supported.
*2 To perform quad link using the input of the optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) installed in the slot, it is necessary
to install the optional 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) in both <SLOT 1> and <SLOT 2>.
*3 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*4 This is supported when the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) is installed in the slot.
*5 This is supported when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in the slot.
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
f To use the 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G), it is necessary for the firmware version of the 3G-SDI Terminal
Board with Audio to be 2.00 or later. Consult your dealer regarding the version update to the latest firmware if the version is earlier than
2.00.
For details on how to confirm the firmware version, refer to "How to confirm the firmware version of the 3G-SDI Terminal Board with Audio"
(x page 31).
Chapter 6 Appendix — Specifications
/576i to 4 096 x 2 160
*3 *3
/576i to 4 096 x 2 160
*3 *3
/576i to 2 048 x 1 080
*3 *3
ENGLISH - 219