Making Adjustments And Selections - Panasonic PT-RQ13K Operating Instructions Manual

Chapter 3 Basic Operations — Switching on/off the projector
Initial setting (date and time)
Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR
SETUP] menu → [DATE AND TIME].
To set the date and time automatically, refer to "Setting the date and time automatically" (x page 139).
1) Press as to select an item.
2) Press qw to switch the setting.
3) Press the <ENTER> button.
f Confirm the setting value and complete the initial setting.

Making adjustments and selections

It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.
1) Press the <FOCUS> button to roughly adjust the focus of the image. (x page 64)
2) Change the setting of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the
installation mode. (x page 35)
f Refer to "Navigating through the menu" (x page 76) for the operation of the menu screen.
3) Select the input by pressing the input selection button on the remote control or the control panel.
f The buttons that can be used on the remote control or the control panel are as follows.
Remote control:
<DIGITAL LINK> button, <DVI-D> button, <HDMI> button, <SLOT 1> button, <SLOT 2> button, <SDI>
button
Control panel:
<SDI 1/2> button, <SDI 3/4> button, <DIGITAL LINK> button, <SLOT 1> button, <SLOT 2> button
f For details of operation for input selection, refer to "Switching the input" (x page 69).
4) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 43)
5) Press the <SHIFT> button to adjust the image position.
6) If the input signal is DVI-D/HDMI signal, press the <AUTO SETUP> button.
62 - ENGLISH
INITIAL SETTING
YEAR 20XX
1
MONTH
1
DAY
12
HOUR
34
MINUTE
56
SECOND
Please set the date and time of the built-in clock of the
projector.
MENU SELECT CHANGE
SET
ENTER
3)
4)
7/7
2) 1) 5) 7) 8) 9)
1) 8)
6)
6)
3)
2)
5)
7) 9)