Table of Contents
Advertisement
2 Specifications and Settings
2.1.2 400 V Specifications
2.1.2
400 V Specifications
Item
Control Method
With Rotary
Servomotor
Feedback
With Linear
Servomotor
Surrounding Air
Temperature
Storage Temperature
Surrounding Air Humidity
Storage Humidity
Vibration Resistance
Shock Resistance
Environ-
mental
Degree of Protection
Conditions
Pollution Degree
Altitude
Others
Applicable Standards
Mounting
Speed Control Range
Coefficient of Speed
Fluctuation
Perfor-
mance
Torque Control Precision
(Repeatability)
Soft Start Time
Setting
10
IGBT-based PWM control, sine wave current drive
Serial encoder:
• Absolute linear encoder (The signal resolution depends on
the absolute linear encoder.)
• Incremental linear encoder (The signal resolution depends
on the incremental linear encoder or Serial Converter Unit.)
-5°C to 55°C
*1
-20°C to 85°C
95% relative humidity max. (with no freezing or condensation)
95% relative humidity max. (with no freezing or condensation)
4.9 m/s
19.6 m/s
IP10
2
• Must be no corrosive or flammable gases.
• Must be no exposure to water, oil, or chemicals.
• Must be no dust, salts, or iron dust.
1,000 m or less.
Do not use the SERVOPACK in the following locations: Loca-
tions subject to static electricity noise, strong electromagnetic/
magnetic fields, or radioactivity
Refer to the following section for details.
Compliance with UL Standards, EU Directives, and Other
Base-mounted
1:5000 (At the rated torque, the lower limit of the speed control
range must not cause the Servomotor to stop.)
±0.01% of rated speed max. (for a load fluctuation of 0% to
100%)
0% of rated speed max. (for a voltage fluctuation of ±10%)
*2
±0.1% of rated speed max. (for a temperature fluctuation of
25°C ±25°C)
±1%
0 s to 10 s (Can be set separately for acceleration and deceler-
ation.)
Specification
24 bits
(incremental encoder/absolute
encoder)
2
2
Safety Standards on page xxi
Advertisement
Table of Contents
