Ip Setting - ZyXEL Communications WAC6000 Series Manual

5.2 IP Setting

Use this screen to configure the IP address for your NWA/WAC. To access this screen, click
Configuration > Network > IP Setting.
Figure 31 Configuration > Network > IP Setting (Retake screenshot)
Each field is described in the following table.
Table 29 Configuration > Network > IP Setting
LABEL
IP Address
Assignment
Get
Automatically
Use Fixed IP
Address
IP Address
Subnet Mask
Gateway
Chapter 5 Network
DESCRIPTION
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Select this if you want to specify the IP address, subnet mask, and gateway manually.
Enter the IP address for this interface.
Enter the subnet mask of this interface in dot decimal notation. The subnet mask
indicates what part of the IP address is the same for all computers in the network.
Enter the IP address of the gateway. The NWA/WAC sends packets to the gateway when
it does not know how to route the packet to its destination. The gateway should be on
the same network as the interface.
NWA5000 / WAC6000 Series User's Guide
62