Shutdown; Chapter 19 Shutdown; Overview; What You Need To Know - ZyXEL Communications WAC6000 Series Manual

19.1 Overview

Use this screen to shutdown the device.
Always use Maintenance > Shutdown > Shutdown or the shutdown
command before you turn off the NWA/WAC or remove the power. Not
doing so can cause the firmware to become corrupt.

19.1.1 What You Need To Know

Shutdown writes all cached data to the local storage and stops the system processes. Shutdown is
different to reset; reset returns the device to its default configuration.

19.2 Shutdown

To access this screen, click Maintenance > Shutdown.
Figure 110 Maintenance > Shutdown
Click the Shutdown button to shut down the NWA/WAC. Wait for the device to shut down before
you manually turn off or remove the power. It does not turn off the power.
You can also use the CLI command shutdown to shutdown the NWA/WAC.
C
HAPTER
NWA5000 / WAC6000 Series User's Guide
186
1 9

Shutdown