Ip Setting - ZyXEL Communications NWA Series User Manual

• The NCC Discovery screen
Center (NCC) discovery settings.

9.2 IP Setting

Use this screen to configure the IP address for your Zyxel Device. To access this screen, click
Configuration > Network > IP Setting.
Figure 52 Configuration > Network > IP Setting
Each field is described in the following table.
Table 37 Configuration > Network > IP Setting
LABEL
IP Address Assignment
Get
Automatically
Use Fixed IP
Address
IP Address
Subnet Mask
Gateway
Chapter 9 Network
(Section 9.6 on page
DESCRIPTION
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Select this if you want to specify the IP address, subnet mask, and gateway manually.
Enter the IP address for this interface.
Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
Enter the IP address of the gateway. The Zyxel Device sends packets to the gateway when
it does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
NWA/WAC/WAX Series User's Guide
97
103) configures the Zyxel Device's Nebula Control