Navigation Panel - ZyXEL Communications WAC6000 Series Manual

The fields vary with the type of object. The following table describes labels that can appear in this
screen.
Table 13 Object References
LABEL
Object Name
#
Service
Priority
Name
Description
Refresh
Cancel
CLI Messages
Click CLI to look at the CLI commands sent by the Web Configurator. These commands appear in a
popup window, such as the following.
Figure 14 CLI Messages
Click Clear to remove the currently displayed information.
Note: See the Command Reference Guide for information about the commands.

2.3.2 Navigation Panel

Use the menu items on the navigation panel to open screens to configure NWA/WAC features. Click
the arrow in the middle of the right edge of the navigation panel to hide the navigation panel menus
or drag it to resize them. The following sections introduce the NWA/WAC's navigation panel menus
and their screens.
Chapter 2 The Web Configurator
DESCRIPTION
This identifies the object for which the configuration settings that use it are displayed. Click
the object's name to display the object's configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
This is the type of setting that references the selected object. Click a service's name to
display the service's configuration screen in the main window.
If it is applicable, this field lists the referencing configuration item's position in its list,
otherwise N/A displays.
This field identifies the configuration item that references the object.
If the referencing configuration item has a description configured, it displays here.
Click this to update the information in this screen.
Click Cancel to close the screen.
NWA5000 / WAC6000 Series User's Guide
33