Www Overview - ZyXEL Communications WAC6000 Series Manual

The Current Time and Current Date fields will display the appropriate settings if the
synchronization is successful.
If the synchronization was not successful, a log displays in the View Log screen. Try re-configuring
the Date/Time screen.
To manually set the NWA/WAC date and time:
Click System > Date/Time.
1
Select Manual under Time and Date Setup.
2
Enter the NWA/WAC's time in the New Time field.
3
Enter the NWA/WAC's date in the New Date field.
4
Under Time Zone Setup, select your Time Zone from the list.
5
As an option you can select the Enable Daylight Saving check box to adjust the NWA/WAC clock
6
for daylight savings.
Click Apply.
7
To get the NWA/WAC date and time from a time server:
Click System > Date/Time.
1
Select Get from Time Server under Time and Date Setup.
2
Under Time Zone Setup, select your Time Zone from the list.
3
Under Time and Date Setup, enter a Time Server Address.
4
Click Apply.
5

12.4 WWW Overview

The following figure shows secure and insecure management of the NWA/WAC coming in from the
WAN. HTTPS and SSH access are secure. HTTP, Telnet, and FTP management access are not secure.
Chapter 12 System
NWA5000 / WAC6000 Series User's Guide
133