ZyXEL Communications WAC6000 Series Manual page 182

Figure 106 Maintenance > LEDs > Locator
The following table describes fields in the above screen.
Table 84 Maintenance > LED > Locator
LABEL
Turn On
Turn Off
Automatically Extinguish
After
Apply
Refresh
Chapter 16 LEDs
DESCRIPTION
Click Turn On button to activate the locator. The Locator function will show the
actual location of the WAC between several devices in the network.
Otherwise, click Turn Off to disable the locator feature.
Enter a time interval between 1 and 60 minutes to stop the locator LED from
blinking. Default is 10 minutes.
Click Apply to save changes in this screen.
Click Refresh to update the information in this screen.
NWA5000 / WAC6000 Series User's Guide
182