Log Setting - ZyXEL Communications WAC6000 Series Manual

The following table describes the labels in this screen.
Table 73 Configuration > Log & Report > Email Daily Report
LABEL
Enable Email
Daily Report
Mail Server
SSL/TLS
Encryption
Mail Server Port
Mail Subject
Mail From
Mail To
SMTP
Authentication
User Name
Password
Send Report
Now
Time for
sending report
Report Items
Reset All
Counters
Apply
Reset

13.3 Log Setting

These screens control log messages and alerts. A log message stores the information for viewing
(for example, in the Monitor > View Log screen) or regular e-mailing later, and an alert is e-
mailed immediately. Usually, alerts are used for events that require more serious attention, such as
system errors and attacks.
The NWA/WAC provides a system log and supports e-mail profiles and remote syslog servers. The
system log is available on the View Log screen, the e-mail profiles are used to mail log messages
to the specified destinations, and the other four logs are stored on specified syslog servers.
Chapter 13 Log and Report
DESCRIPTION
Select this to send reports by e-mail every day.
Type the name or IP address of the outgoing SMTP server.
Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you
want encrypted communications between the mail server and the NWA/WAC.
Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS.
Select No to not encrypt the communications.
Enter the same port number here as is on the mail server for mail traffic.
Type the subject line for the outgoing e-mail. Select Append system name to add the
NWA/WAC's system name to the subject. Select Append date time to add the NWA/WAC's
system date and time to the subject.
Type the e-mail address from which the outgoing e-mail is delivered. This address is used in
replies.
Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Click this button to have the NWA/WAC send the daily e-mail report immediately.
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
Select the information to include in the report. Select Reset counters after sending
report successfully if you only want to see statistics for a 24 hour period.
Click this to discard all report data and start all of the counters over at zero.
Click Apply to save your changes back to the NWA/WAC.
Click Reset to return the screen to its last-saved settings.
NWA5000 / WAC6000 Series User's Guide
156