Table of Contents
Advertisement
Using your hob
To switch the hob on
•
To switch the power on, touch and hold the "On/off sensor" (1)
approximately two seconds. The hob will beep and all displays will
show "0".
Please note: If a power level is not set within ten seconds, the hob
will switch off automatically.
After switching the mains supply on to the hob, or if the mains supply
is interrupted and then restored, the safety key lock may be activated.
The safety key lock LED will be on to indicate this. Simply press and
hold the safety key lock sensor (2) for approximately two seconds to
deactivate the satey key lock and proceed to use the hob as normal.
The safety key lock also activates after 60 seconds if the appliance
is switched off via the on/off sensor (1). This is to help to prevent
accidental use. Simply follow the same step as above to deactivate
the safety key lock.
To set the power level
•
Simply select the desired zone using the relevant cooking zone
sensor (3) and then use the power level slider to set the required
power level. The power level ranges from the 1 (minimum) to the 9
(maximum). The hob will then begin heating.
To turn the power off to a zone
•
To switch off a zone you can touch the relevant cooking zone
6
for
Advertisement
Table of Contents
