Table of Contents
Advertisement
Auto-heat function
Each zone is equipped with an auto-heat function which shortens
the warm-up time for that zone before reverting the set power level.
•
To activate the auto-heat function, touch position '9' of the power
level slider twice. The relevant zone's display will alternate between
power level '9' and the letter ' A ' for approximately 10 seconds. Within
this time, set the desired power level by touching the power level
slider. The relevant zone display will alternate between the set
power level and the letter ' A ' for the duration that the auto-heat
function is active.
•
To disengage the auto-heat function simply use the power level
slider to return the zone's power level to '0'. Alternatively, if you
have finished using the hob, you can use the on/off sensor (1).
Zone Power Level
Maximum
Operating Time
(minutes)
Please note: The auto-heat function is not compatible with heat
setting 9 nor the keep-warm function.
If a power level (between 1 and 8) is not selected within 10 seconds of
preparing the auto-heat function, then the function will be deactivated.
10
1
2
3
4
- -
1
3
4.8
6.5
5
6
7
8
9
8.5
2.5
3.5
4.5
- -
Advertisement
Table of Contents
