Table of Contents
Advertisement
touch the slider at any point to raise the number of minutes.
•
Once the time has elapsed the hob will emit an acoustic signal and
the zone will cease operation. To cancel the acoustic signal simply
press any sensor field.
To cancel the timer
•
Simply select the zone being timed (indicated by the LEDs as per
page 11) using the timer sensor (10) and then use the power level
slider (4) to return the number of minutes to "0". The slider should
be used with a swiping motion from right to left using the complete
fingertip. When you have reached the edge of the slider, lift your
finger and start again from right to left. You can also touch the slider
at the low level indicator instead of swiping.
To set the minute minder
•
First switch on the hob if necessary and touch the timer sensor (10)
once. This will activate the minute minder.
•
Next, set the desired number of minutes using the power level
slider. The minute minder will then begin counting down and you
can continue to use the zones as normal.
•
Once the minute minder has elapsed the hob will emit an acoustic
signal. To cancel the acoustic signal simply press any sensor field.
To cancel the minute minder
•
Simply press the timer sensor (10) and then use the power level
slider to return the number of minutes to "0". The timer will then be
cancelled.
12
Advertisement
Table of Contents
