Interrupt Copy - Ricoh Gestetner DSm790 Operating Instructions Manual

Copying
F
Press the {Start} key.
The machine starts copying.
When placing originals on the exposure glass, press the {q} key after all
originals are scanned.
Copies are delivered face down.
Note
2
❒ Always log off when you have finished using the machine to prevent un-
authorized users from using the machine.
❒ You can specify whether copies are output face up or face down.
❒ To stop the machine during a multi-copy run, press the {Stop} key.
❒ To cancel all copy jobs and return the machine to the default condition,
press the {Clear Modes} key.
❒ To clear entered values, press the {Clear} key or [Cancel] on the screen.
❒ To confirm settings, press [Check Modes].
Reference
"When the Authentication Screen is Displayed", About This Machine
"Administrator Tools", General Settings Guide
"Input/Output", General Settings Guide

Interrupt Copy

Use this function to interrupt a long copy job to make urgently needed copies.
A
Press the {Interrupt} key.
B
The machine stops scanning. Remove the originals that were being copied.
C
Place the originals you want to copy.
D
Press the {Start} key.
The machine starts making copies.
E
When copying is complete, remove the originals and copies.
30
APG002S