Temporarily Stopping One Job To Copy Something Else (Interrupt); Recalling Job Settings (Job Recall) - Ricoh Aficio 400 User Manual

Temporarily Stopping One Job To Copy
Something Else (Interrupt)
You can make urgently needed copies
during a multicopy run by pressing the
Interrupt key. The interrupted copy job
settings are stored in the machine's
memory. After interrupt copying is com-
pleted, press this key again to recall the
previous copy job settings.
In Interrupt mode,
the display.
If you use this function with the op-
tional document feeder, you might
have to reset originals not to be copied
after interrupt copying is finished. Fol-
low the instructions on the display.
Regarding the functions that cannot
be used together with this function,
see page 105.

Recalling Job Settings (Job Recall)

The previous copy job settings before
auto reset or Low Power mode can
be recalled by pressing the Job Re-
call key. When the previous copy job
setting is saved, the Job Recall indi-
cator is lit.

is displayed on
s/Energy Saver
Interrupt
Program Job Recall
BASIC OPERATIONS
Clear Mod
C
53