Ricoh Gestetner DSm790 Operating Instructions Manual page 30

Item
Stamp Position on Desig-
nating Page
Stamp Position
Superimpose
Page Numbering Initial
Letter
Stamp Text
Font
Size
Superimpose
Stamp Setting
❖ Input / Output
Item
SADF Auto Reset
Copy Eject Face Method
in Glass Mode
Memory Full Auto Scan
Restart
Sort / Stack Shift Tray Set-
ting
Insert Separation Sheet
Staple Position
Punch Type
Finisher: Staple Position
Finisher: Punch Type
Simplified Screen: Finish-
ing Types
10
Description
You can select to print the page number onto slip sheets when us-
ing the Designate function set to [Copy] and the Page Numbering
function together.
You can specify how each of stamp is printed.
You can have page numbers printed in white when they overlap
black parts of the image.
Switch the page print language.
You can select the font in Stamp Text mode.
You can set the size of the stamp printed in Stamp Text mode.
You can have the Stamp Text printed in white when it overlaps
black parts of the image.
You can specify how Stamp Text is printed.
Description
In SADF mode, an original must be set within a specified time after
the previous original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The timing is set to "5 second(s)" by default.
You can specify the way in which copies are delivered when cop-
ying an original placed on the exposure glass.
When memory becomes full while scanning originals, the machine
can make copies of scanned originals first, and then automatically
proceed scanning remaining originals.
You can specify whether to shift the Shift Tray in sort mode or
stack mode.
You can specify the number of copy pages for inserting the Sepa-
ration Sheet from 1 to 999 pages in increments of 1 page.
Specify which Top 2 staples or Bottom shown on the initial display
with priority. The optional Finisher SR5000 is required to use this
function.
Specify which punch type (2 holes or 4 holes) has priority to be
shown on the initial display.
The optional Finisher SR5000 and Multi-hole Punch Unit are re-
quired to use this function.
Specify the stapling position. The optional Finisher SR5000 is re-
quired to use this function.
Specify the punch type.
The optional Finisher SR5000 and Multi-hole Punch Unit are re-
quired to use this function.
You can select which key is displayed with higher priority for "Fin-
ishing Types" on the Simplified Screen.