The Effects Chain Editor - Kurzweil K2700 Musician's Manual

Chapter 4

The Effects Chain Editor

When in Program Edit Mode on the FX page, pressing the EDIT button while a Chain
(other than 0 None) is highlighted—on any of the various effects pages—will call up the
Chain editor.
You may edit Effects Chains containing up to 16 effects boxes using up to 32 units of DSP
(digital signal processing) FX resources. Choose from 18 types of effects boxes, including
hundreds of effects box algorithms and presets. Create custom controller assignments and
apply modulation with LFOs, ASRs and mathematical functions.
From the Program editor, the program's Insert and Aux Chains can be edited from the FX
and LYR FX pages. In Multi Edit Mode, Chains selected for Aux overrides can be edited
from the FX page.
A Chain is made up of one or more effect-boxes, with each box containing a single effect.
You can have up to 16 effect-boxes in a Chain. The settings for all of the parameters of
each effect-box are also stored within the Chain. There are 30 Mod Controls that allow for
real-time control over any parameter from any effect-box in the Chain. Per Chain Control
sources are also provided to be used as inputs to the effect Mods (two FXLFOs, two FXASRs,
and four FXFUNs). These work similarly to the LFOs, ASRs and FUNs in Program mode,
but are only available for use with the effect Mods.
The Effects Chain Editor
4-1