The Save Changes Dialog - Kurzweil K2700 Musician's Manual

The LOCATE FORWARD Button
Press the LOCATE FORWARD button to add one Bar to the current value of the Locate
parameter.
Controlling the TRANSPORT Section with External
Sequencers
You can control the PLAY/PAUSE, and STOP buttons from an external sequencer sending
System Real-Time or MIDI Machine Control (MMC) messages. To receive these messages,
go to the Global Mode MIDI page and set the Receive Transport parameter to the desired
message type.

The Save Changes Dialog

The following dialog appears after you have recorded a track and pressed STOP.
The PLAY NEW soft button allows you to play the song with your last recorded
performance. You will likely want to hear this first.
Pressing PLAY OLD will play the current song, minus the performance that you just
recorded. You can toggle between Play Old and Play New without restarting the song
by pressing either button while the song is playing. This is useful to check if your last
performance was better or worse than what was previously saved (if anything was previously
saved).
The Playing field displays whether to NEW or OLD version is playing.
The Locate field allows you choose a start time for the old or new playback. This is useful
when you just want to hear a certain part of the song without listening to the whole thing.
Song Mode
The Save Changes Dialog
8-3