Kurzweil K2700 Musician's Manual page 328

Global Mode
FILE (Storage Page)
Loading Forte Object Files (.FOR)
When loading Forte objects from .FOR files, some Programs and Keymaps may be
incompatible if they use Keymaps and Samples that are not available on the K2700. It may
be possible to edit these Programs after loading and select K2700 Keymaps that sound very
similar to the incompatible Forte Keymaps. For example, the K2700 does not have the same
Japanese Grand Piano Keymaps and Samples that the Forte has, but it does have similar
Keymaps that use a reduced set of the Forte Japanese Grand Piano Samples.
Loading Legacy Program/Keymap/Sample Object Files
When loading objects from .P3A, .P3K, .PC3, .PLE, .SPX, .K26, .K25, or .KRZ files, some
parameters may need to be edited after loading.
Program Parameter info names and some controller assignments may need to be edited after
loading.
A small number of Keymaps that use Samples with very short loops (such as oscillator wave
Samples) may playback inconsistently. In this case, the problem can often be fixed by editing
the Program to select a similar oscillator wave Keymap.
Some Programs and Samples that use reverse Sample playback may sound slightly different,
and may benefit from Keymap or Sample loop editing after loading.
Some legacy K2 series factory Keymaps/Samples (such as oscillator wave Samples) will be
remapped to use K2700 keymaps and samples, and will often sound very close or the same
as on the original instrument. Some legacy K2 series factory keymaps/samples can not be
remapped and may need to be replaced manually by editing the Program and selecting a
different factory Keymap.
Loading Legacy K2 Series Object Files (K26, .K25, .KRZ)
When loading objects from K26, .K25, or .KRZ files, objects are converted to K2700 object
types. Some object parameters cannot be converted and must be edited after loading.
All K2 series Keymap objects can be loaded, some parameters will be converted to K2700
specific parameters.
Most K2 series Program objects can be loaded. FX cannot be converted and must be edited
after loading. Parameter info names and some controller assignments may need to be edited
after loading. See the section above for more details on loading legacy Keymaps and Samples.
The Program Editor Keymap page sample skipping parameter (SmpSkp) cannot be loaded,
so Samples can only be transposed upward by one octave. Programs and Keymaps may need
to be edited to compensate for this.
A small number of DSP algorithms and functions (some filters, oscillators, etc.) cannot be
loaded, so Program layers may need to be edited to compensate for this.
KB3 programs created with a K2500 or K2600 cannot be loaded, however the K2700
contains a variety of KB3 programs which can easily be modified and edited.
9-17