Kurzweil K2700 Musician's Manual page 235

Multi Edit Mode
MAIN Page
Input Channel basically has the same effect as Local Keyboard Channel, except you can
choose to play only one or some Multi Zones from an external device, instead of all Zones.
To play more than one Zone from an external device, set each desired Zone's Input Channel
parameter to match the channel on which the external MIDI device is transmitting.
Input Channel Settings
When setting a MIDI channel number for the Input Channel parameter, channel 1 for
example, you can choose "1 L+M" or "1 M" (scroll past "16 L+M" to see all the choices.)
A channel number with a setting of "L+M" indicates that the zone will be playable from
the K2700 keyboard (L for Local) and from the external MIDI controller (M for MIDI.)
A channel number with a setting of "M" indicates that the zone will be playable only from
the external MIDI controller, and not from the K2700 keyboard. You can also choose "Any
L+M" or "Any M" for the Input Channel setting. "Any L+M" and "Any M" will make the
zone receive MIDI on any channel that an external device is transmitting. This is useful
if you are using a single external MIDI controller and are not sure which channel it is
transmitting on.
Zone Name
Use the Zone Name parameter to give the Zone a name that can be viewed when Multi
Mode is set to show Zone Info. By default the Zone's Program name is used as the Zone
name.
To edit the Zone name, select the Zone Name field and press the EDIT button to enter the
Zone Name editor. Use the Navigation buttons and soft buttons to change the Zone name.
Press OK to save the new Zone name, or CANCEL to return to the previous page.
For details on showing Zone Info in Multi Mode, see
7-12
"Show Zone Info" on page 9-3.