Kurzweil K2700 Musician's Manual page 304

Song Mode
The TRACK Page
Grab
Grab is similar to the Copy function, except that the Grab function allows you to copy
selected events from tracks that exist in other songs in memory.
Source Song: Song List
Use the Source Song parameter to select a song to Grab. The source track is determined
by the Track parameter displayed on upper right hand side of the page, selectable with the
CHANNEL/LAYER/ZONE/TRACK buttons.
Destination Track: 1 to 16/All
Select a destination track for the grabbed events with the Destination Track parameter. All
selected events from the source song and track will be placed in the destination track(s) at the
bar, beat, and tick you specify.
If the currently selected track is All tracks then the destination track will be All tracks as well.
No matter what channel the current track (source track in the source song) is set to when you
use the grab function, the events will be played on the destination track's channel.
Location: Bars : Beats : Ticks
Use the Location parameter to specify a bar, beat, and tick location in the destination track
where the grabbed events will be placed. If the length of the grabbed region extends from the
Location point beyond the song's existing End point, a new End point is defined.
Mode: Merge/Erase/Slide
The Mode setting determines whether the grabbed events merge with, or erase existing events
on the destination track from the location point to the end of the grabbed region. With
Mode set to Slide, the sequencer creates space for the new events, and slides the existing
events to uniformly later times in the song.
8-33