Frm (Firmware Information); Img (Firmware Image) - Comtech EF Data UT-4500 Series Installation And Operation Manual

UT-4500 Series C- and Ku-Band Up Converters
Serial Interface Operation
8.7.2.21

FRM (Firmware Information)

Use FRM to query the firmware loaded in the current production unit. This
includes firmware numbers, versions, and release dates. This query replaces the
legacy FRW query.
Description
Return Firmware Information:
Confirmation:
8.7.2.22

IMG (Firmware Image)

Use IMG to set or return selection of a valid bulk image as the next active boot
image.
Description
Set Next FW Image:
Confirmation:
Return Active FW Image:
Confirmation:
Details
<DEV/FRM_{cr}
>DEV/FRM_{cr}
Boot: {cr}
FW-AAAAAAA B.B.BB DD/MM/YY{cr}
Bulk1: {cr}
FW-AAAAAAA B.B.BB DD/MM/YY{cr}
FW-AAAAAAA B.B.BB DD/MM/YY{cr}
FW-AAAAAAA B.B.BB DD/MM/YY{cr}
Bulk2: {cr}
FW-AAAAAAA B.B.BB DD/MM/YY{cr}
FW-AAAAAAA B.B.BB DD/MM/YY{cr}
FW-AAAAAAA B.B.BB DD/MM/YY{cr}{lf}]
where: FW-AAAAAAA = the firmware part number
B.B.BB = the version number
DD/MM/YY = Day/Month/Year firmware released
Details
<DEV/IMG_x{cr} where:
x = 1 or 2
>DEV/IMG_x{cr}{lf}]
<DEV/IMG_{cr}
>DEV/IMG_x{cr}{lf}]
8–18
MN/UT4500.IOM
Revision 3