Comtech EF Data UT-4500 Series Installation And Operation Manual page 130

UT-4500 Series C- and Ku-Band Up Converters
Ethernet Interface Operation
The factory defaults for these names/passwords are:
• Admin
• Read/Write
• Read Only
Failure to enter the correct User name and Password will return you to
the Login window. Should you continue to specify an invalid User name
or Password, the message "You do not have security privilege to access
this area." displays.
Otherwise, upon entry of the valid IP address and login information UT-
4500 Web Server Interface "splash" page displays, similar to the example
shown in Figure 7-4. The unit and firmware version in this example will
differ from your setup.
Figure 7-4. HTTP Interface "Splash" Page Example
The appearance and function of all UT-4500 Series HTTP Interface pages
are, for all purposes, identical to that of the DT-4503C HTTP Interface
page examples that are featured throughout this chapter.
comtech/comtech
opcenter/1234
monitor/1234
7–8
MN/UT4500.IOM
Revision 3