Table of Contents
Advertisement
3.
Remove the Phillips M2.0 × 2.5 broad head screw (3) that secures the fingerprint reader and bracket to the
computer.
4.
Remove the fingerprint reader bracket (4).
The fingerprint reader bracket is included in the Bracket Kit, spare part number N13682-001.
5.
Remove the fingerprint reader (5) and cable.
To install the fingerprint reader, reverse the removal procedure.
Fingerprint reader cable
To remove the fingerprint reader cable, use this procedure and illustration.
NOTE:
The fingerprint reader cable is included in the Cable Kit, spare part number N18760-001.
Before removing the fingerprint reader cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the right speaker (see
5.
Remove the fingerprint reader (see
Remove the fingerprint reader cable:
72
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
41).
Speakers on page
49).
Fingerprint reader on page
39).
71).
39).
Hide quick links:
Advertisement
Table of Contents
