3.
Remove the fingerprint reader (3) from the computer.
To install the fingerprint reader, reverse this procedure.
Fingerprint reader cable
To remove the fingerprint reader cable, use this procedure and illustration.
NOTE:
The fingerprint reader cable is included in the Cable Kit, spare part number M03431-001.
Before removing the fingerprint reader cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the fan (see
5.
Remove the system board (see
6.
Remove the fingerprint reader bracket (see
Remove the fingerprint reader cable:
56
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
35).
Fan on page
48).
System board on page
Fingerprint reader (select products only) on page
34).
52).
34).
55).