6.
If the WWAN antenna is not connected to the terminal on the WWAN module, install a protective sleeve on
the antenna connector, as shown in the following illustration.
To install the WWAN module, reverse the removal procedure.
NOTE:
WWAN modules are designed with a notch to prevent incorrect insertion.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-4
Memory module description and part numbers
Description
32 GB (SODIMM, DDR5-4800, 1.1v, NECC)
16 GB (SODIMM, DDR5-4800, 1.1v, NECC)
8 GB (SODIMM, DDR5-4800, 1.1v, NECC)
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
Spare part number
N05331-001
M97596-001
M97595-001