HP EliteBook 845 Maintenance And Service Manual page 66

d. Remove the hinges.
e. The display panel is secured to the display back cover with tape that is installed under the left (1) and
right sides of the panel. To remove the panel, use tweezers to grasp the end of the tape (2). While
turning the tweezers, wrap the tape around the tweezers as you continue to pull the tape out (3) from
behind the display panel. You must pull the tape multiple times before it is completely removed.
f. Release the display panel cable from the retention clips (1) built into the bottom edge of the display
back cover.
g. Swing the top edge of the display panel (2) up and forward until it rests upside down in front of the
display assembly.
h. Release the adhesive support strip (3) that secures the display panel cable to the back of the display
panel.
i. Release the retention bar (4) that secures the display panel cable to the back of the display panel.
60 Chapter 5 Removal and replacement procedures for authorized service provider parts