Table of Contents
Advertisement
Release the ZIF connector (1) to which the fingerprint reader cable is connected, and then disconnect the
▲
fingerprint reader cable (2) from the fingerprint reader.
To install the fingerprint reader cable, reverse the removal procedure.
Card reader cable
To remove the card reader cable, use this procedure and illustration.
NOTE:
The card reader cable is included in the Cable Kit, spare part number N18760-001.
Before removing the card reader cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the left speaker (see
Remove the card reader cable:
1.
Release the ZIF connector (1) to which the card reader cable is connected, and then disconnect the card
reader cable from the system board.
2.
Release the ZIF connector (2) to which the card reader cable is connected, and then disconnect the card
reader cable from the card reader.
Preparation for disassembly on page
Bottom cover on page
Battery on page
41).
Speakers on page
49).
39).
39).
Card reader cable
73
Hide quick links:
Advertisement
Table of Contents
