Display Assembly - HP EliteBook 845 Maintenance And Service Manual

4. Remove the fan (4) from the computer.
To install the fan, reverse the removal procedure.

Display assembly

To remove and disassemble the display assembly, use these procedures and illustrations.
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the display assembly:
1. Disconnect the webcam module cable (1) from the system board.
2. Carefully disconnect the WWAN module antenna cables (2) from the WWAN module.
NOTE:
that identify them with a number that corresponds to a terminal on the WWAN module. Connect the
antenna cable to the corresponding WWAN module terminal.
Bottom cover on page
Computer models have up to four WWAN module antenna cables. The antenna cables have tags
Preparation for disassembly on page
39).
Battery on page
39).
41).
Display assembly 55