Avaya AG250 Hardware Installation Manual page 25

Application gateway server
Hide thumbs Also See for AG250:
Table of Contents

Advertisement

Hard Disk(s) fail (80)
Hard Disk(s) fail (40)
Hard Disk(s) fail (20)
Hard Disk(s) fail (10)
Hard Disk(s) fail (08)
Keyboard is locked out - Unlock the key.
BIOS detect the keyboard is locked. P17 of the keyboard controller is
pulled low.
Keyboard error or no keyboard present.
Cannot initialize the keyboard. Make sure that the keyboard is attached
correctly and no keys are being pressed during the boot.
Manufacturing POST loop.
System will repeat POST procedure infinitely while the P15 of keyboard
controller is pulled low. This is also used for M/B burn in testing.
BIOS ROM checksum error - System halted.
The checksum of ROM address F0000H-FFFFFH is bad.
Memory test fail..
BIOS reports the a memory test fail if the onboard memory has an error.
Chapter 2
Specifications and BIOS Self-Test Messages
HDD reset failed
®
HDD controller diagnostics failed.
®
HDD initialization error.
®
Unable to recalibrate fixed disk.
®
Sector Verify failed.
®
Application Gateway Hardware Installation Guide
BIOS Self-Test Messages
19

Advertisement

Table of Contents
loading

Table of Contents