Power / Master Volume; Turning The Power On / Off; Adjusting The Master Volume - Roland E-X10 Owner's Manual

Power / Master Volume

Turning the Power On / Off

1.
Make sure the instrument is properly connected to power supply.
2.
Press the [POWER] switch, the LCD screen turns on, indicating the
instrument is powered on.
3.
If you are ready to turn off the instrument, press and hold the [POW-
ER] switch again.
Note:
If the LCD isn't lit after you turn on the power, please check the power
connection.

Adjusting the Master Volume

Rotate the [VOLUME] knob clockwise to increase the master volume or
counter-clockwise to decrease it.
Adjust to set the desired volume level.
Note:
If the instrument keeps silent, check if the volume has been set to mini-
mum or if headphones are plugged into the PHONES/OUTPUT jack.
8